Nagios Insallation

Installing Nagios in server

Nagios is a popular open source computer system and network monitoring software application. It watches hosts and services, alerting users when things go wrong and again when they get better.

Nagios was originally designed to run under Linux, but also runs well on other Unix variants. It is free software, licensed under the terms of the GNU General Public License version 2 as published by the Free Software Foundation.

------------------------------
1. [root@hooligunsrpg ~] yum update nagios nagios-plugins nagios-devel nagios-plugins-nrpe
2. Configure the Nagios Apache file

Unless you want other options such as SSL configurations or allowing access to the CGI from only certain hosts, then the default nagios.conf file will suit your needs. Here's what it looks like:

ScriptAlias /nagios/cgi-bin "/usr/lib/nagios/cgi"

# SSLRequireSSL
Options ExecCGI
AllowOverride None
Order allow,deny
Allow from all
# Order deny,allow
# Deny from all
# Allow from 127.0.0.1
AuthName "Nagios Access"
AuthType Basic
AuthUserFile /etc/nagios/htpasswd.users
Require valid-user
Alias /nagios "/usr/share/nagios"

# SSLRequireSSL
Options None
AllowOverride None
Order allow,deny
Allow from all
# Order deny,allow
# Deny from all
# Allow from 127.0.0.1
AuthName "Nagios Access"
AuthType Basic
AuthUserFile /etc/nagios/htpasswd.users
Require valid-user


Unless you want other options configured, that's it for now. Let's set up authentication now.

3. Set up the password file

[root@hooligunsrpg ~] htpasswd -c /etc/nagios/htpasswd.users nagiosadmin
New password: type_your_password
Re-type new password: re-type_your_password
Adding password for user nagiosadmin

If you want a guest account, add the account.

[me@mymachine ~] htpasswd /etc/nagios/htpasswd.users guest
New password: type_your_password
Re-type new password: re-type_your_password
Adding password for user guest

NOTE: Notice I took away the "-c" option. This is the create option. Since you already created the file, make sure any other accounts you add are not with the create option. You'll wipe the file out if you do.

4. http://localhost/nagios/

5. [root@hooligunsrpg ~] cd /etc/nagios/objects

6. [root@hooligunsrpg objects] touch .cfg

7. [root@hooligunsrpg objects]# cat .cfg

define host{
use redversd-server ; Name of host template to use
; This host definition will inherit all variables that are defined
; in (or inherited by) the linux-server host template definition.
host_name
alias redversd
address 77.92.85.127
}

define hostgroup{
hostgroup_name redversd-servers ; The name of the hostgroup
alias redversd ; Long name of the group
members ; Comma separated list of hosts that belong to this group
}

define service{
use redversd-service
hostgroup_name redversd-servers
service_description MYSQL
check_command check_nrpe!check_mysql!
notifications_enabled 1
}

define service{
use redversd-service
hostgroup_name redversd-servers
service_description Load
check_command check_nrpe!check_load!10.0,9.0,8.0
notifications_enabled 1
}

#define service{
# use redversd-service
# hostgroup_name graeme-servers
# service_description Total Procs
# check_command check_nrpe!check_total_procs!
# notifications_enabled 1
# }

define service{
use redversd-service
hostgroup_name redversd-servers
service_description Mail Service
check_command check_smtp
notifications_enabled 1
}


define service{
use redversd-service
hostgroup_name redversd-servers
service_description Disk check
check_command check_nrpe!check_sda3!
notifications_enabled 1
}

define service{
use redversd-service
hostgroup_name redversd-servers
service_description HTTP
check_command check_http
notifications_enabled 1
}

8. [root@hooligunsrpg objects]# vi templates.cfg

edit "define host" under "# Linux host definition template - This is NOT a real host, just a template!"

define host{
name linux-server ; The name of this host template
use generic-host ; This template inherits other values from the generic-host template
check_period 24x7 ; By default, Linux hosts are checked round the clock
check_interval 5 ; Actively check the host every 5 minutes
retry_interval 1 ; Schedule host check retries at 1 minute intervals
max_check_attempts 10 ; Check each Linux host 10 times (max)
check_command check-host-alive ; Default command to check Linux hosts
notification_period workhours ; Linux admins hate to be woken up, so we only notify during the day
; Note that the notification_period variable is being overridden from
; the value that is inherited from the generic-host template!
notification_interval 120 ; Resend notifications every 2 hours
notification_options d,u,r ; Only send notifications for specific host states
contact_groups admins ; Notifications get sent to the admins by default
register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
}

edit under "# Generic service definition template - This is NOT a real service, just a template!"

define service{
name generic-service ; The 'name' of this service template
active_checks_enabled 1 ; Active service checks are enabled
passive_checks_enabled 1 ; Passive service checks are enabled/accepted
parallelize_check 1 ; Active service checks should be parallelized (disabling this can lead to major performance problems)
obsess_over_service 1 ; We should obsess over this service (if necessary)
check_freshness 0 ; Default is to NOT check service 'freshness'
notifications_enabled 1 ; Service notifications are enabled
event_handler_enabled 1 ; Service event handler is enabled
flap_detection_enabled 1 ; Flap detection is enabled
failure_prediction_enabled 1 ; Failure prediction is enabled
process_perf_data 1 ; Process performance data
retain_status_information 1 ; Retain status information across program restarts
retain_nonstatus_information 1 ; Retain non-status information across program restarts
is_volatile 0 ; The service is not volatile
check_period 24x7 ; The service can be checked at any time of the day
max_check_attempts 3 ; Re-check the service up to 3 times in order to determine its final (hard) state
normal_check_interval 10 ; Check the service every 10 minutes under normal conditions
retry_check_interval 2 ; Re-check the service every two minutes until a hard state can be determined
contact_groups admins ; Notifications get sent out to everyone in the 'admins' group
notification_options w,u,c,r ; Send notifications about warning, unknown, critical, and recovery events
notification_interval 60 ; Re-notify about service problems every hour
notification_period 24x7 ; Notifications can be sent out at any time
register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
}

9. [root@hooligunsrpg objects]# cd ..

10. [root@hooligunsrpg nagios]# vi nagios.cfg

set the path for .cfg

# Definitions for monitoring the local (Linux) host
cfg_file=/etc/nagios/objects/localhost.cfg
cfg_file=/etc/nagios/objects/.cfg

11. [root@hooligunsrpg nagios]# cd objects/

12. [root@hooligunsrpg objects]# vi contacts.cfg

define contact{
contact_name tech ; Short name of user
use generic-contact ; Inherit default values from generic-contact template (defined above)
alias Nagios Admin ; Full name of user

email tech@jomongee.co.uk ; <<***** CHANGE THIS TO YOUR EMAIL ADDRESS ******
}
--------------------------------

define contactgroup{
contactgroup_name admins
alias Nagios Administrators
members nagiosadmin,tech
}

13. [root@hooligunsrpg objects]# vi commands.cfg

define command{
command_name check_nrpe
command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$
}

14. [root@hooligunsrpg nagios]# /etc/init.d/httpd start

15. [root@hooligunsrpg nagios]# /etc/init.d/nagios start





Nagios in client
------------------

1. Installing NRPE (Nagios Client) on CentOS 5 VIA repo

rpm -Uhv http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS//rpmforge-release-0.3.6-1.el5.rf.x86_64.rpm
sudo yum install nagios-nrpe-2.5.2-1.el5.rf.x86_64.rpm
If you installed via yum, skip down to the section on Check and configure NRPE.

or

1. You'll see that nagios assumes that you will be running NRPE under the user "nagios", so lets add that user and group.

root@ds-red [~]# /usr/sbin/adduser nagios
root@ds-red [~]# passwd nagios

2. Grab the current NRPE installer from the nagios website http://www.nagios.org/download/addons/

root@ds-red [~]# wget http://prdownloads.sourceforge.net/sourceforge/nagios/nrpe-2.12.tar.gz

3. root@ds-red [~]# tar -xvf nrpe-2.12.tar.gz

4. If you want to add SSL support, add --enable-ssl to the command below.

root@ds-red [~]# ./configure

In my case I was missing the SSL headers, so I will install them via yum.

root@ds-red [~]# yum install openssl-devel

5. By default CentOS does not come with xinetd, so we need to grab that from YUM.

root@ds-red [~]# yum install xinetd
root@ds-red [~]# ./configure
root@ds-red [~]# make all
root@ds-red [~]# make install-plugin
root@ds-red [~]# make install-daemon
root@ds-red [~]# make install-daemon-config
root@ds-red [~]# make install-xinetd

*Optional but not required below

root@ds-red [~]# cp src/nrpe /usr/local/nagios/libexec/
root@ds-red [~]# cp src/check_nrpe /usr/local/nagios/libexec/

13. Now we need to install the plug-ins so we will grab them from Nagios as well on the http://sourceforge.net/projects/nagiosplug/files/

root@ds-red [~]# wget http://prdownloads.sourceforge.net/sourceforge/nagiosplug/nagios-plugins-1.4.14.tar.gz
root@ds-red [~]# tar -xf nagios-plugins-1.4.14.tar.gz
root@ds-red [~]# cd nagios-plugins-1.4.14
root@ds-red [~]# ./configure -prefix=/usr/local/nagios
root@ds-red [~]# make
root@ds-red [~]# make install

14. Now in the configuration find and update the allowed hosts line to be the IP of your nagios server(s)

root@ds-red [~]# vi /usr/local/nagios/etc/nrpe.cfg
....
allowed_hosts=serverip
server_address=serverip

# The following examples use hardcoded command arguments...

command[check_users]=/usr/local/nagios/libexec/check_users -w 5 -c 10
command[check_load]=/usr/local/nagios/libexec/check_load -w 15,10,5 -c 30,25,20
command[check_hda1]=/usr/local/nagios/libexec/check_disk -w 20% -c 10% -p /dev/hda1
command[check_zombie_procs]=/usr/local/nagios/libexec/check_procs -w 5 -c 10 -s Z
command[check_total_procs]=/usr/local/nagios/libexec/check_procs -w 150 -c 200
command[check_mysql]=/usr/local/nagios/libexec/check_mysql

15. root@ds-red [~]# vi /etc/xinetd.d/nrpe

only_from = 127.0.0.1
CHANGE TO
only_from = serverip

If you have more than one Nagios server, you would seperate them with a ','.

16. Last, we need to append the following line to /etc/services:

root@ds-red [~]# vi /etc/services
....
nrpe 5666/tcp

17. Check and configure your NRPE client

First, and most important, if you are running iptables or a firewall between the server and host, make sure that the host is allowing port 5666 from the server's IP address.

Here is an example for the iptables entry:

root@ds-red [~]# iptables -I RH-Firewall-1-INPUT -p tcp -m tcp --dport 5666 -j ACCEPT

18. Last, lets set those permissions correctly:

root@ds-red [~]# chown nagios.nagios /usr/local/nagios
root@ds-red [~]# chown -R nagios.nagios /usr/local/nagios/libexec

19. Next lets start xinetd:

root@ds-red [~]# /sbin/service xinetd restart

20. Lets check if NRPE is listening:

root@ds-red [~]# netstat -at | grep nrpe
....
tcp 0 0 *:nrpe *:* LISTEN

21. Now you should be able to add the host as normal to your nagios server config files.

You can test that everything is working by using the following command on the host:

root@ds-red [~]# /usr/local/nagios/libexec/check_nrpe -H localhost

This should return the version output:

NRPE v2.12

root@ds-red [~]# /usr/local/nagios/libexec/check_nrpe -n -H xxx.xxx.xxx.xxx-p 5666

Read more »

Script to replace a string with another string in a file.

Lets assume that the file name is test. The file test contains many lines and you want to replace a line with another line.

1) Make a file abc,sh.
$ touch abc.sh

2) Insert the script into abc,sh.
$ vi abc.sh press i, then paste

#/bin/bash
cat filename
echo "enter the newstring"
read new
echo "enter the oldstring"
read old
sed -i "s/$old/$new/g" test

3) sh abc.sh

Output:
------
enter the newstring
new
enter the oldstring
old
------

Read more »

Script to Restore multiple accounts from another server. Cpanel.

Copy the backup files of cpanel in *.tar.gz to the new servers /home. After that open a screen.
1) $ screen

2)Then run the following script in the screen.
$ for i in `cat file1`; do /scripts/restorepkg $i; done
Note:in file1 the usernames must be present. For that run this script.
(for i in `cat /etc/trueuserdomains`; do echo $i|cut -d . -f1; done > file1)

3)Then exit from screen.
press ctrl + a + d.

Read more »

Zen Cart Installation

Zen Cart is an online store management system. It is PHP-based, using a MySQL database and HTML components. Support is provided for numerous languages and currencies, and it is freely available under the GNU General Public License.

1)Log into cpanel of the server
2)Under the menu Software/Services select Fantastico de Luxe
3)Under the menu E-Commerce you can find an option called Zen Cart, click on it to begin installation.
4)Click on New installation from the menu
5)Select the domain from the drop down menu to select the domain where the installation has to be done.
6)Leave the install directry blank if u want to install in document root, else give the folder name.
7)Give the username and password and click on the Install Zen Cart button
8)In the next screen you will be given the links to the zen cart admin area along with username and password.

Read more »

Installing phpBB in LINUX

phpBB is a popular Internet forum package written in the PHP scripting language. The name "phpBB" is an abbreviation of PHP Bulletin Board. Available under the GNU General Public License, phpBB is free and open source software.

Note: Install LAMP before doing this. If its a cpanel server you can install it via fantastico.

1) cd /usr/local/src

2) Download the pakage from
http://www.phpbb.com/downloads

3)tar -xjf phpBB-3.0.4.tar.bz2

4)mv phpBB3/ /var/www/html/ or the correct document root set in your server.

5)mv phpBB3 forums

6)Setup MYSQL
#mysqladmin -u root password 'passwordyouwant'
#mysql -u root -p
Create the new phpbb database:
create database phpbb;

Create new user and password for database:
grant all privileges on phpbb.* to username identified by ‘password‘;
or
grant all privileges on phpbb.* to username@localhost identified by ‘password‘;

Flush the privileges:
flush privileges;

Test the mySQL Setup:
exit

7)
#mysql -u username -p
enter password here
show databases;
The result should look similar to this:
+——————–+
| Database |
+——————–+
| information_schema |
| mysql |
| test |
| phpbb |
+——————–+
4 rows in set (0.29 sec)

8)Take the browser and go to http://ip/forum

9)We have to give chmod 777 to that folder and its contents inside.
Follow the steps in the browser and procced.
I sucessfully installed phpBB using these steps. For more information you may also refer:http://www.phpbb.com/support/documentation/3.0/

Read more »